We sure do! To access this, you can use the following steps:
1) Open the Zuma app and tap into your chosen area.
2) Tap on the settings icon in the top right-hand corner.
3) Select a Zuma in that room and you’ll see the IP address.
4) Enter this IP address into a web browser and you’ll have access to that Zuma Device.
From here you’ll have the following tabs:
- Main Page (Info, Network detail, and protocol).
- Device Settings (Check for Firmware Updates, reboot & Factory Reset).
- Network Settings (Settings, Scan for available, and configure network settings).
- Zuma Settings (Identify your main unit and if necessary, change your main unit).
- Alexa (Visible on Zuma main unit, for the area, showing if you are logged in or log out of Amazon Alexa).
TIP: If you want to run a Factory Reset using this tool, perform the reset on the non-main unit first and then the main unit to help ensure the best manual reset experience.
------------
If you need any further assistance, please call us on 01952 984 244 (Monday - Friday 08:00-18:00) or email us at help@zuma.ai